Wine Guardian 025 Professional Cooling Systems
starting at $4,995
Wine GuardianOur incredible new Wine Guardian is the most versatile cooling system you can buy. It installs anywhere that you have space: adjacent to your wine cellar, above your wine cellar or up to 25 feet away from you wine cellar. It provides complete and effective forced-air cooling that's fully thermostatically controlled. Optional humidification is available for dry climates. Best of all you can install it yourself.
- Black Finish
- Most versatile cooling system
- be ducted or go through-the-wall
- Reliable forced-air cooling
- Wall-mounted thermostat
- Ideal when outside venting is necessary
- Only system that can install in an attic
- Optional humidification and heating available (billed separately sales tax)
- Optional duct work and collars available
- 4 sizes from 3000 up to 15200 BTU's
- Cools wine cellars from 1,500 to 5,500 cubic feet
- 1000/1/4 ton 3000 14H" x 14W" x 35L"
- Integrated Humidifier: Add: $950.00 + Tax $78.38
*Please note that any glass in a wine cellar, especially entire glass walls, can significantly affect the heat loss of the room and require a larger unit to cool the room properly.
Wine Guardian Cooling System Specifications
Shipping & Sales Taxnot included (select drop down menu)
* Assumes a properly insulated, vapor sealed room on all sides
|Models # Wine Guardian|| Unit Size|
H "x W" x D"
| Volts/Amps |
|WG D025 ||14.25 /23.5 /47.5 |
| 115/20 |
|14H / 33W / 22D|
| 115/20 |
|14.25 /23.5 /47.5|
| 208/10 |
$6,595 sale $5,995
|WG D200 ||18.25 /23.5 /47.5 |
| 208/10 |
Sales Tax not included in the Options - we will add it up manually
| Wine Guardian - Accessories|| Item # ||Prices|
| Wine Guardian Accessory Kit|
(2 Duct Collars & 25' Flex Duct)
| Wine Guardian 10" Duct Collars||CM-10-DC||$109|
| Wine Guardian 25' Flex Duct||CM-25-FLX||$129|
| Wine Guardian pre-filter||CM-Pre Filter||$175|
| Wine Guardian Heater||CM-Heater||$795|
| Wine Guardian Humidifier||CM-Humidifier||$550|
Sales Tax not included for the Options - we will add it up manually
It installs anywhere that you have space: adjacent to your wine cellar or above your wine cellar or even up to 25 ft wawy from your wine cellar. It provides complete and effective forced-air cooling that is fully thermostatically controlled.
All Options are factory-installed and require a 30-day lead time.
Humidifier - The humidifier is designed for field installation and can be retrofitted onto existing CellarMate units. Each humidifier model is furnished with an electronic digital humidistat to control the humidity in the cellar. The humidifier mounts onto the CellarMate unit using the common drain, and requires a hot water supply. No additional external power is required.
The CellarMate humidifier uses a 10" wide x 11" high x 2" thick pad. The rated output capacity for wine cellars at 55°F is 1.62.3 gallons per day (gpd) with 760°F water supply, 34.57 gpd with 950°F water, and 7.45.1 gpd with 120°F water. Weight of operating humidifier is 10 lbs.
Heating Coil - The optional heating coil is built-in and requires no additional power source. The electric heating option is factory installed and includes primary and secondary over-temperature protection devices per UL and NEC. It is located between the evaporator coil and the blower inside the transition duct. It contains the heating element and high-temperature limit switches. The heating coil is wired to work in conjunction with the thermostat. Since the thermostat prevents the heating and cooling circuits from being on at the same time, no additional power wiring is needed. Set the auto mode on the thermostat so it can automatically switch from heating to cooling.
No maintenance is required for the heating coil. To test the heating coil operation, set the thermostat on heat and set the temperature above the cellar temperature. The supply air temperature should rise above the return air.
Low Ambient Kit - This option is recommended for applications where the ambient temperatures in the mounting area are 40°F or lower. The low-ambient option utilizes a low-pressure switch and compressor crankcase heater.
Options are factory-installed and require a 30-day lead time.
Flexible Ducting - The flexible ducting is a 25’ foot length of 10" insulated ducting for the CM050, CM088, and CM200 and 8" insulated ducting for the CM025.